Start with the room, not the number of fittings
Think about where you read, cook, work and relax. A row of downlights down the centre may leave a kitchen bench in shadow or put glare directly above the sofa. Tell us where the furniture and work surfaces will be.
Beam angle describes how widely the light spreads. A wider beam and a narrow beam create different results even when the lights have similar output. Lumens describe light output; watts describe electrical power use.
Colour temperature and CCT switches
Warm white gives a softer appearance, while cooler white can look crisper. Colour temperature is expressed in Kelvin. Many modern downlights have a selectable CCT switch, so one fitting offers several colour settings. We can set suitable fittings to the look you prefer and match nearby lights where possible.
That selector changes the colour of the light. It is separate from dimming, which changes brightness. A colour-selectable fitting is not necessarily one you can change from the wall whenever you like.
Dimming and ceiling compatibility
Most modern downlights and many globes are dimmable, but the dimmer and light need to work together. We also need to change the switchplate to accommodate a dimmer. Tell us before installation so it is included in the quote.
Labels such as IC-4 relate to installation conditions around insulation. The fitting and driver must be installed according to their instructions. Send the product details rather than assuming every LED downlight is suitable for every insulated ceiling.
Replacing battens or fluorescent lights
The old fitting can leave holes or marks that the new downlights will not cover. Plan for patching and painting as well as the electrical work. Photos of the existing fittings and a simple room layout are useful starting points.

